Hack Vertigo Sound VSC-2 v1.1.2 - The Best Analog Modeled Compressor Plugin
If you are looking for a compressor plugin that can deliver the classic sound of analog VCA compression with modern features and flexibility, you should check out the Vertigo Sound VSC-2 v1.1.2 plugin. This plugin is a faithful emulation of the original hardware Vertigo VSC-2 Quad Discrete Compressor, which is widely regarded as one of the best compressors ever made.
In this article, we will show you how to hack Vertigo Sound VSC-2 v1.1.2 x86 x64 with R2R keygen and enjoy its amazing features and sound quality for free.
What is Vertigo Sound VSC-2?
Vertigo Sound VSC-2 is a plugin that recreates the sound and behavior of the hardware Vertigo VSC-2 Quad Discrete Compressor, which was launched in 2007 by Vertigo Sound, a Munich-based pro-audio manufacturing venture. The hardware VSC-2 is known for its four custom hand-built discrete 1979 VCAs, which give it a smooth, clear, glossy, and precise compression tone. Unlike other VCA compressors, the VSC-2 incorporates four discrete 1979 VCAs across two channels, with one VCA in the audio path and another one in the audio sidechain, allowing it to react to out of phase peaks without image shift. The VSC-2 also provides variable harmonics depending on gain reduction and make up gain, making it one of the cleanest coloring devices out there.
The plugin version of the VSC-2 captures every nuance of the original hardware, bringing its legendary performance to your DAW. The plugin offers a stereo and a mono version, as well as a mix mode that allows you to adjust the wet/dry balance of the compression. The plugin also adds some modern enhancements, such as a sidechain filter, an external sidechain input, a parallel mix knob, and a headroom control. The plugin also features a comprehensive metering section that shows input/output levels, gain reduction, and peak hold.
What are the features of Vertigo Sound VSC-2?
Some of the main features of Vertigo Sound VSC-2 are:
Ratio variable from soft mode through compression ratios of 2:1, 4:1, 8:1 and 10:1 all the way to Brick mode. Soft mode provides a smooth and transparent compression that starts with ratios as low as 1:1 and then slowly and automatically increases to as high as 8:1 as the signal intensifies. Brick mode transforms the VSC-2 into an analog limiter that effectively cuts off signal peaks for a tight and smooth tone.
Threshold variable from -20dB to +20dB.
Make Up Gain variable from -20dB to +20dB.
Attack variable from 0.01ms to 100ms.
Release variable from 0.01ms to 4s.
Sidechain Filter with four settings: Off, 60Hz, 90Hz, and 150Hz. This allows you to filter out low frequencies from the sidechain signal and prevent unwanted pumping effects.
External Sidechain Input that lets you use an external signal to trigger the compression.
Mix knob that lets you blend the compressed and uncompressed signals for parallel compression effects.
Headroom control that lets you adjust the internal operating level of the plugin from -18dBFS to +18dBFS.
Metering section that shows input/output levels, gain reduction, and peak hold.